Persuading developers to buy into software process improvement: a local opinion and empirical evidence

This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.---- Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.In order to investigate practitioners’ opinions of software process and software process improvement, we have collected a large volume of qualitative evidence from 13 companies. At the same time, other researchers have reported investigations of practitioners, and we are interested in how their reports may relate to our evidence. Thus, other research publications can also be treated as a form of qualitative data. In this paper, we review advice on a method, content analysis, that is used to analyse qualitative data. We use content analysis to describe and analyse discussions on software process and software process improvement. We report preliminary findings from an analysis of both the focus group evidence and four publications

Persuading developers to buy into software process improvement: an exploratory analysis

In order to investigate practitioners' opinions of software process and software process improvement, we have collected information from 13 companies, in a variety of ways i.e. the use of Repertory Grid Technique, survey and focus group discussions. Both the Repertory Grid Technique and the focus group discussions (43 discussions occurred, in total) produced a large volume of qualitative data. At the same time, other researchers have reported--investigations of practitioners, and we are interested in how their reports may relate to our own. Thus, other research publications can also be treated as a form of qualitative data. In this paper, we review advice on a method, content analysis, that is used to analyse qualitative data. Content analysis is a method for identifying and classifying words and phrases used in--ordinary language. We use content analysis to describe and analyse discussions on software--process and software process improvement. We report preliminary findings from an analysis--of both the focus group evidence and some publications. Our main finding is that there is an--apparent contradiction between developers saying that they want evidence for software process improvement, and what developers will accept as evidence. This presents a serious problem for research: even if researchers could demonstrate a strong, reliable relationship between software process improvement and improved organisational performance, there would still be the problem of convincing practitioners that the evidence applies to their particular situation

Molecular epidemiology of Mycobacterium africanum in Ghana

BACKGROUND: Mycobacterium africanum comprises two phylogenetic lineages within the M. tuberculosis complex (MTBC) and is an important cause of human tuberculosis (TB) in West Africa. The reasons for this geographic restriction of M. africanum remain unclear. Here, we performed a prospective study to explore associations between the characteristics of TB patients and the MTBC lineages circulating in Ghana. METHOD: We genotyped 1,211 MTBC isolates recovered from pulmonary TB patients recruited between 2012 and 2014 using single nucleotide polymorphism typing and spoligotyping. Associations between patient and pathogen variables were assessed using univariate and multivariate logistic regression. RESULTS: Of the 1,211 MTBC isolates analysed, 71.9 % (871) belonged to Lineage 4; 12.6 % (152) to Lineage 5 (also known as M. africanum West-Africa 1), 9.2 % (112) to Lineage 6 (also known as M. africanum West-Africa 2) and 0.6 % (7) to Mycobacterium bovis. Univariate analysis revealed that Lineage 6 strains were less likely to be isoniazid resistant compared to other strains (odds ratio = 0.25, 95 % confidence interval (CI): 0.05-0.77, P < 0.01). Multivariate analysis showed that Lineage 5 was significantly more common in patients from the Ewe ethnic group (adjusted odds ratio (adjOR): 2.79; 95 % CI: 1.47-5.29, P < 0.001) and Lineage 6 more likely to be found among HIV-co-infected TB patients (adjOR = 2.2; 95 % confidence interval (CI: 1.32-3.7, P < 0.001). CONCLUSION: Our findings confirm the importance of M. africanum in Ghana and highlight the need to differentiate between Lineage 5 and Lineage 6, as these lineages differ in associated patient variables

Technology demonstrator of a novel software defined radio-based aeronautical communications system

YesThis paper presents the architectural design, software implementation, the validation and flight trial results of an aeronautical communications system developed within the Seamless Aeronautical Networking through integration of Data links Radios and Antennas (SANDRA) project funded by the European 7th Framework Aeronautics and Transport Programme. Based on Software Defined Radio (SDR) techniques, an Integrated Modular Radio (IMR) platform was developed to accommodate several radio technologies. This can drastically reduce the size, weight and cost in avionics with respect to current radio systems implemented as standalone equipment. In addition, the modular approach ensures the possibility to dynamically reconfigure each radio element to operate on a specific type of radio link. A radio resource management (RRM) framework is developed in the IMR consisting of a communication manager for the resource allocation and management of the different radio links and a radio adaptation manager to ensure protocol convergence through IP. The IMR has been validated though flight trials held at Oberpfaffenhofen, Germany in June 2013. The results presented in the paper validate the flexibility and scalability of the IMR platform and demonstrate seamless service coverage across different airspace domains through interworking between the IMR and other components of the SANDRA network.European Commissio

Genomic epidemiological analysis identifies high relapse among individuals with recurring tuberculosis and provides evidence of household recent TB transmission in Ghana

OBJECTIVE: We investigated the cause of recurring tuberculosis (rcTB) among pulmonary TB participants recruited from a prospective population-based study conducted between July 2012 and December 2015. METHODS: Mycobacterium tuberculosis complex isolates obtained from rcTB cases were characterized by standard mycobacterial genotyping tools in addition to whole genome sequencing, followed by phylogenetic analysis to assess strain relatedness. RESULTS: A greater proportion (58.3%, 21/36) of individuals with rcTB episodes had TB recurrence within 12 months post treatment. Only 19.4% (7/36) of participants with rcTB harbored a strain with isoniazid (INH) resistance at baseline of which 29% (2/7) were additionally resistant to rifampicin. However, 27.8% (10/36) harbored an INH resistant strain upon recurring of which 40% (4/10) were MDR-TB strains. Recurrent TB was attributed to relapse (same strain) in 75.0% (27/36) of participants with 25.0% (9/36) attributed to re-infection. CONCLUSION: Our findings indicate that unresolved previous infection due to inadequate treatment may be the major cause of rcTB

Statistical evaluation of a new resistance model for cold-formed stainless steel cross-sections subjected to web crippling

This paper presents a statistical evaluation according to Annex D of EN 1990 (2002) of a new resistance function for web crippling design of cold-formed stainless steel cross-sections. This resistance function was derived by Bock et al. (2013) through the use of carefully validated numerical models with the aim to propose a design expression for stainless steel sections, which are currently designed following the provisions for cold-formed carbon steel sections given in EN 1993-1-3 (2006). Although it was shown that the proposed design equation is appropriate for application to various stainless steels, the statistical uncertainties in material properties that the different types of stainless steels exhibit require an assessment of various partial safety factors. The statistical assessment showed that the proposed resistance function by Bock et al. (2013) requires adjustment to satisfy the safety level set out in EN 1993-1-4 (2006); A recalibration is performed herein. The web crippling design provisions given in EN 1993-1-3 (2006) and SEI/ASCE 8-02 (2002) American standard for application to stainless steel are also statistically evaluated herein. Comparison with test and numerical data showed that the predictions of the recalibrated resistance function are better suited and consistent than existing design provisionsResearch Fund for Coal and Stee

Tribological behavior of 316L stainless steel reinforced with CuCoBe + diamond composites by laser sintering and hot pressing: a comparative statistical study

The aim of this work was to perform a statistical analysis in order to assess how the tribological properties of a laser textured 316L stainless steel reinforced with CuCoBe - diamond composites are affected by diamond particles size, type of technology (laser sintering and hot pressing) and time of tribological test. The analysis started with the description of all response variables. Then, by using IBM® SPSS software, the Friedman’s test was used to compare how the coefficient of friction varied among samples in five-time points. From this test, results showed that there was no statistically significant difference in the coefficient of friction mean values over the selected time points. Then, the two-samples Kolmogorov-Smirnov (K-S) test was used to test the effect of the diamond particles size and the type of technology on the mean of the coefficient of friction over time. The results showed that, for both sintering techniques, the size of the diamond particles significantly affected the values of the coefficient of friction, whereas no statistical differences were found between the tested sintering techniques. Also, the two-way ANOVA test was used to evaluate how these factors influence the specific wear rate, which conducted to the same conclusions drawn for the previous test. The main conclusion was that the coefficient of friction and the specific wear rate were statistically affected by the diamond particles size, but not by the sintering techniques used in this work.This work was supported by FCT national funds, under the national support to R&D units grant, through the reference projects UIDB/04436/2020 and UIDP/04436/2020. Additionally, this work was supported by FCT with the reference projects UIDB/00319/2020 and PTDC/CTM-COM/30416/2017

Towards a framework for work package allocation for GSD

Proceeding of: Proceeding of: OTM 2011 Workshops: Confederated International Workshops and Posters: EI2N+NSF ICE, ICSP+INBAST, ISDE, ORM, OTMA, SWWS+MONET+SeDeS, and VADER 2011, Hersonissos, Crete, Greece, October 17-21, 2011Global software development is an inexorable trend in the software industry. The impact of the trend in conventional software development can be found in many of its aspects. One of them is task or work package allocation. Task allocation was traditionally driven by resource competency and availability but GSD introduces new complexities to this process including time-zones differences, costs and cultural differences. In this work a report on the construction of a framework for work-package allocation within GSD projects is presented. This framework lies on three main pillars: individual and organizational competency, organizational customization and sound assessment methods.This work is supported by the Spanish Centro para el Desarrollo Tecnológico Industrial (CDTI) under the Eureka Project E! 6244 PROPS-Tour and the national cooperation project SEM-IDi (IDI-20091150)

Comparative characterization of mesenchymal stem cells from eGFP transgenic and non-transgenic mice

Abstract Background Adipose derived- and bone marrow-derived murine mesenchymal stem cells (mMSCs) may be used to study stem cell properties in an in vivo setting for the purposes of evaluating therapeutic strategies that may have clinical applications in the future. If these cells are to be used for transplantation, the question arises of how to track the administered cells. One solution to this problem is to transplant cells with an easily identifiable genetic marker such as enhanced green fluorescent protein (eGFP). This protein is fluorescent and therefore does not require a chemical substrate for identification and can be visualized in living cells. This study seeks to characterize and compare adipose derived- and bone marrow-derived stem cells from C57Bl/6 mice and eGFP transgenic C57Bl/6 mice. Results The expression of eGFP does not appear to affect the ability to differentiate along adipogenic or osteogenic lineages; however it appears that the tissue of origin can influence differentiation capabilities. The presence of eGFP had no effect on cell surface marker expression, and mMSCs derived from both bone marrow and adipose tissue had similar surface marker profiles. There were no significant differences between transgenic and non-transgenic mMSCs. Conclusion Murine adipose derived and bone marrow derived mesenchymal stem cells from non-transgenic and eGFP transgenic C57Bl/6 mice have very similar characterization profiles. The availability of mesenchymal stem cells stably expressing a genetic reporter has important applications for the advancement of stem cell research.</p